From Wikipedia, the free encyclopedia
"PCR" redirects here. For other uses, see
PCR (disambiguation).
A strip of eight PCR tubes, each containing a 100μl reaction.
The polymerase chain reaction (PCR) is a technique widely used in
molecular biology. It derives its name from one of its key components, a
DNA polymerase used to amplify a piece of
DNA by
in vitro enzymatic replication. As PCR progresses, the DNA thus generated is itself used as template for replication. This sets in motion a
chain reaction in which the DNA template is
exponentially amplified. With PCR it is possible to amplify a single or few copies of a piece of DNA across several orders of magnitude, generating millions or more copies of the DNA piece. PCR can be extensively modified to perform a wide array of
genetic manipulations.
Almost all PCR applications employ a heat-stable DNA polymerase, such as
Taq polymerase, an enzyme originally isolated from the bacterium
Thermus aquaticus. This DNA polymerase
enzymatically assembles a new DNA strand from DNA building blocks, the
nucleotides, using single-stranded DNA as template and
DNA oligonucleotides (also called
DNA primers) required for initiation of DNA synthesis. The vast majority of PCR methods use
thermal cycling, i.e., alternately heating and cooling the PCR sample to a defined series of temperature steps. These thermal cycling steps are necessary to physically separate the strands (at high temperatures) in a DNA double helix (
DNA melting) used as
template during DNA synthesis (at lower temperatures) by the DNA polymerase to selectively amplify the target DNA. The selectivity of PCR results from the use of
primers that are
complementary to the DNA region targeted for amplification under specific thermal cycling conditions.
Developed in 1983 by
Kary Mullis,
[1] PCR is now a common and often indispensable technique used in medical and biological research labs for a variety of applications.
[2][3] These include
DNA cloning for
sequencing, DNA-based
phylogeny, or functional analysis of
genes; the diagnosis of
hereditary diseases; the identification of
genetic fingerprints (used in forensic sciences and
paternity testing); and the detection and diagnosis of
infectious diseases. In 1993 Mullis won the
Nobel Prize in Chemistry for his work on PCR.
[4]Contents
1 PCR principles and procedure1.1 Procedure2 PCR stages2.1 PCR optimization3 Application of PCR3.1 Isolation of genomic DNA3.2 Amplification and quantitation of DNA3.3 PCR in diagnosis of diseases4 Variations on the basic PCR technique5 History5.1 Patent wars6 References7 External linksPCR principles and procedure
PCR is used to amplify specific regions of a DNA strand (the DNA target). This can be a single gene, a part of a gene, or a non-coding sequence. Most PCR methods typically amplify DNA fragments of up to 10
kilo base pairs (kb), although some techniques allow for amplification of fragments up to 40 kb in size.
[5]A basic PCR set up requires several components and reagents.
[6] These components include:
DNA template that contains the DNA region (target) to be amplified.
Two
primers, which are
complementary to the DNA regions at the
5' (five prime) or
3' (three prime) ends of the DNA region.
A
DNA polymerase such as
Taq polymerase or another DNA polymerase with a temperature optimum at around 70°C.
Deoxynucleoside triphosphates (dNTPs; also very commonly and erroneously called
deoxynucleotide triphosphates), the building blocks from which the DNA polymerases synthesizes a new DNA strand.
Buffer solution, providing a suitable chemical environment for optimum activity and stability of the DNA polymerase.
Divalent cations,
magnesium or
manganese ions; generally Mg2+ is used, but Mn2+ can be utilized for PCR-mediated DNA mutagenesis, as higher Mn2+ concentration increases the error rate during DNA synthesis
[7]Monovalent cation
potassium ions.
The PCR is commonly carried out in a reaction volume of 20-150 μl in small reaction tubes (0.2-0.5 ml volumes) in a
thermal cycler. The thermal cycler heats and cools the reaction tubes to achieve the temperatures required at each step of the reaction (see below). Many modern thermal cyclers make use of the
Peltier effect which permits both heating and cooling of the block holding the PCR tubes simply by reversing the electric current. Thin-walled reaction tubes permit favorable thermal conductivity to allow for rapid thermal equilibration. Most thermal cyclers have heated lids to prevent condensation at the top of the reaction tube. Older thermocyclers lacking a heated lid require a layer of oil on top of the reaction mixture or a ball of wax inside the tube.
Procedure
Schematic drawing of the PCR cycle. (1) Denaturing at 94-96°C. (2) Annealing at ~65°C (3) Elongation at 72°C. Four cycles are shown here. The blue lines represent the DNA template to which primers (red arrows) anneal that are extended by the DNA polymerase (light green circles), to give shorter DNA products (green lines), which themselves are used as templates as PCR progresses.
The PCR usually consists of a series of 20 to 40 repeated temperature changes called cycles; each cycle typically consists of 2-3 discrete temperature steps. Most commonly PCR is carried out with cycles that have three temperature steps (Fig. 2). The cycling is often preceded by a single temperature step (called hold) at a high temperature (>90°C), and followed by one hold at the end for final product extension or brief storage. The temperatures used and the length of time they are applied in each cycle depend on a variety of parameters. These include the enzyme used for DNA synthesis, the concentration of divalent ions and dNTPs in the reaction, and the melting temperature (
Tm) of the primers.
[8]Initialization step: This step consists of heating the reaction to a temperature of 94-96°C (or 98°C if extremely thermostable polymerases are used), which is held for 1-9 minutes. It is only required for DNA polymerases that require heat activation by
hot-start PCR.
[9]Denaturation step: This step is the first regular cycling event and consists of heating the reaction to 94-98°C for 20-30 seconds. It causes melting of DNA template and primers by disrupting the hydrogen bonds between complementary bases of the DNA strands, yielding single strands of DNA.
Annealing step: The reaction temperature is lowered to 50-65°C for 20-40 seconds allowing annealing of the primers to the single-stranded DNA template. Typically the annealing temperature is about 3-5 degrees Celsius below the Tm of the primers used. Stable DNA-DNA hydrogen bonds are only formed when the primer sequence very closely matches the template sequence. The polymerase binds to the primer-template hybrid and begins DNA synthesis.
Extension/elongation step: The temperature at this step depends on the DNA polymerase used;
Taq polymerase has its optimum
activity temperature at 75-80°C,
[10][11] and commonly a temperature of 72°C is used with this enzyme. At this step the DNA polymerase synthesizes a new DNA strand complementary to the DNA template strand by adding dNTPs that are complementary to the template in 5' to 3' direction, condensing the 5'-
phosphate group of the dNTPs with the 3'-
hydroxyl group at the end of the nascent (extending) DNA strand. The extension time depends both on the DNA polymerase used and on the length of the DNA fragment to be amplified. As a rule-of-thumb, at its optimum temperature, the DNA polymerase will polymerize a thousand bases per minute. Under optimum conditions, i.e., if there are no limitations due to limiting substrates or reagents, at each extension step, the amount of DNA target is doubled, leading to exponential (geometric) amplification of the specific DNA fragment.
Final elongation: This single step is occasionally performed at a temperature of 70-74°C for 5-15 minutes after the last PCR cycle to ensure that any remaining single-stranded DNA is fully extended.
Final hold: This step at 4-15°C for an indefinite time may be employed for short-term storage of the reaction.
Two sets of primers were used to amplify a target sequence from three different tissue samples. No amplification is present in sample #1; DNA bands in sample #2 and #3 indicate successful amplification of the target sequence. The gel also shows a positive control, and a DNA ladder containing DNA fragments of defined length for sizing the bands in the experimental PCRs.
To check whether the PCR generated the anticipated DNA fragment (also sometimes referred to as the amplimer or
amplicon),
agarose gel electrophoresis is employed for size separation of the PCR products. The size(s) of PCR products is determined by comparison with a DNA ladder (a molecular weight marker), which contains DNA fragments of known size, run on the gel alongside the PCR products.
PCR stages
The PCR process can be divided into three stages:
Exponential amplification: At every cycle, the amount of product is doubled (assuming 100% reaction efficiency). The reaction is very specific and precise.[
citation needed]
Levelling off stage: The reaction slows as the DNA polymerase loses activity and as consumption of reagents such as dNTPs and primers causes them to become limiting.
Plateau: No more product accumulates due to exhaustion of reagents and enzyme.
PCR optimization
Main article:
PCR optimizationIn practice, PCR can fail for various reasons, in part due to its sensitivity to contamination causing amplification of spurious DNA products. Because of this, a number of techniques and procedures have been developed for optimizing PCR conditions.
[12][13] Contamination with extraneous DNA is addressed with lab protocols and procedures that separate pre-PCR mixtures from potential DNA contaminants.
[6] This usually involves spatial separation of PCR-setup areas from areas for analysis or purification of PCR products, and thoroughly cleaning the work surface between reaction setups. Primer-design techniques are important in improving PCR product yield and in avoiding the formation of spurious products, and the usage of alternate buffer components or polymerase enzymes can help with amplification of long or otherwise problematic regions of DNA.
Application of PCR
Isolation of genomic DNA
PCR allows isolation of DNA fragments from genomic DNA by selective amplification of a specific region of DNA. This use of PCR augments many methods, such as generating
hybridization probes for
Southern or
northern hybridization and
DNA cloning, which require larger amounts of DNA, representing a specific DNA region. PCR supplies these techniques with high amounts of pure DNA, enabling analysis of DNA samples even from very small amounts of starting material.
Other applications of PCR include
DNA sequencing to determine unknown PCR-amplified sequences in which one of the amplification primers may be used in Sanger sequencing, isolation of a DNA sequence to expedite
recombinant DNA technologies involving the insertion of a DNA sequence into a
plasmid or the genetic material of another organism. Bacterial colonies (
E.coli) can be rapidly screened by PCR for correct DNA
vector constructs
[14]. PCR may also be used for
genetic fingerprinting; a forensic technique used to identify a person or organism by comparing experimental DNAs through different PCR-based methods.
Some PCR 'fingerprints' methods have high discriminative power and can be used to identify genetic relationships between individuals, such as parent-child or between siblings, and are used in paternity testing. This technique may also be used to determine evolutionary relationships among organisms.
Amplification and quantitation of DNA
Because PCR amplifies the regions of DNA that it targets, PCR can be used to analyze extremely small amounts of sample. This is often critical for
forensic analysis, when only a trace amount of DNA is available as evidence. PCR may also be used in the analysis of ancient DNA that is thousands of years old. These PCR-based techniques have been successfully used on animals, such as a forty-thousand-year-old
mammoth, and also on human DNA, in applications ranging from the analysis of Egyptian
mummies to the identification of a
Russian Tsar.
[15]Quantitative PCR methods allow the estimation of the amount of a given sequence present in a sample – a technique often applied to quantitatively determine levels of
gene expression.
Real-time PCR is an established tool for DNA quantification that measures the accumulation of DNA product after each round of PCR amplification.
See also
Use of DNA in forensic entomologyPCR in diagnosis of diseases
PCR allows early diagnosis of malignant diseases such as leukemia and lymphomas, which is currently the highest developed in cancer research and is already being used routinely.[
citation needed] PCR assays can be performed directly on genomic DNA samples to detect translocation-specific malignant cells at a sensitivity which is at least 10,000 fold higher than other methods.[
citation needed]
PCR also permits identification of non-cultivatable or slow-growing microorganisms such as mycobacteria, anaerobic bacteria, or viruses from tissue culture assays and animal models. The basis for PCR diagnostic applications in microbiology is the detection of infectious agents and the discrimination of non-pathogenic from pathogenic strains by virtue of specific genes.[
citation needed]
Viral DNA can likewise be detected by PCR. The primers used need to be specific to the targeted sequences in the DNA of a virus, and the PCR can be used for diagnostic analyses or DNA sequencing of the viral genome. The high sensitivity of PCR permits virus detection soon after infection and even before the onset of disease. Such early detection may give physicians a significant lead in treatment. The amount of virus ("viral load") in a patient can also be quantified by PCR-based DNA quantitation techniques (see below).
Variations on the basic PCR technique
Main article:
Variants of PCRAllele-specific PCR: This diagnostic or cloning technique is used to identify or utilize
single-nucleotide polymorphisms (SNPs) (single base differences in DNA). It requires prior knowledge of a DNA sequence, including differences between
alleles, and uses primers whose 3' ends encompass the SNP. PCR amplification under stringent conditions is much less efficient in the presence of a mismatch between template and primer, so successful amplification with an SNP-specific primer signals presence of the specific SNP in a sequence.
[16] See
SNP genotyping for more information.
Assembly PCR or Polymerase Cycling Assembly (PCA):
Assembly PCR is the artificial synthesis of long DNA sequences by performing PCR on a pool of long oligonucleotides with short overlapping segments. The oligonucleotides alternate between sense and antisense directions, and the overlapping segments determine the order of the PCR fragments thereby selectively producing the final long DNA product.
[17]Asymmetric PCR: Asymmetric PCR is used to preferentially amplify one strand of the original
DNA more than the other. It finds use in some types of
sequencing and hybridization probing where having only one of the two complementary stands is required. PCR is carried out as usual, but with a great excess of the primers for the chosen strand. Due to the slow (
arithmetic) amplification later in the reaction after the limiting primer has been used up, extra cycles of PCR are required.
[18] A recent modification on this process, known as Linear-After-The-Exponential-PCR (LATE-PCR), uses a limiting primer with a higher melting temperature (
Melting temperatureTm) than the excess primer to maintain reaction efficiency as the limiting primer concentration decreases mid-reaction.
[19]Helicase-dependent amplification: This technique is similar to traditional PCR, but uses a constant temperature rather than cycling through denaturation and annealing/extension cycles.
DNA Helicase, an enzyme that unwinds DNA, is used in place of thermal denaturation.
[20]Hot-start PCR: This is a technique that reduces non-specific amplification during the initial set up stages of the PCR. The technique may be performed manually by heating the reaction components to the melting temperature (e.g., 95˚C) before adding the polymerase.
[21] Specialized enzyme systems have been developed that inhibit the polymerase's activity at ambient temperature, either by the binding of an
antibody[9] or by the presence of covalently bound inhibitors that only dissociate after a high-temperature activation step. Hot-start/cold-finish PCR is achieved with new hybrid polymerases that are inactive at ambient temperature and are instantly activated at elongation temperature.
Intersequence-specific (ISSR) PCR: a PCR method for DNA fingerprinting that amplifies regions between some simple sequence repeats to produce a unique fingerprint of amplified fragment lengths.
[22]Inverse PCR: a method used to allow PCR when only one internal sequence is known. This is especially useful in identifying flanking sequences to various
genomic inserts. This involves a series of
DNA digestions and
self ligation, resulting in known sequences at either end of the unknown sequence.
[23]Ligation-mediated PCR: This method uses small DNA linkers ligated to the DNA of interest and multiple primers annealing to the DNA linkers; it has been used for DNA sequencing, genome walking, and
DNA footprinting.
[24]Methylation-specific PCR (MSP): The MSP method was developed by Stephen Baylin and Jim Herman at the Johns Hopkins School of Medicine,
[25] and is used to detect methylation of CpG islands in genomic DNA. DNA is first treated with sodium bisulfite, which converts unmethylated cytosine bases to uracil, which is recognized by PCR primers as thymine. Two PCRs are then carried out on the modified DNA, using primer sets identical except at any CpG islands within the primer sequences. At these points, one primer set recognizes DNA with cytosines to amplify methylated DNA, and one set recognizes DNA with uracil or thymine to amplify unmethylated DNA. MSP using qPCR can also be performed to obtain quantitative rather than qualitative information about methylation.
Miniprimer PCR: Miniprimer PCR uses a novel thermostable polymerase (S-Tbr) that can extend from short primers ("smalligos") as short as 9 or 10 nucleotides, instead of the approximately 20 nucleotides required by Taq. This method permits PCR targeting smaller primer binding regions, and is particularly useful to amplify unknown, but conserved, DNA sequences, such as the 16S (or eukaryotic 18S) rRNA gene. 16S rRNA miniprimer PCR was used to characterize a microbial mat community growing in an extreme environment, a hypersaline pond in Puerto Rico. In that study, deeply divergent sequences were discovered with high frequency and included representatives that defined two new division-level taxa, suggesting that miniprimer PCR may reveal new dimensions of microbial diversity.
[26] By enlarging the "sequence space" that may be queried by PCR primers, this technique may enable novel PCR strategies that are not possible within the limits of primer design imposed by Taq and other commonly used enzymes.
Multiplex Ligation-dependent Probe Amplification (MLPA): permits multiple targets to be amplified with only a single primer pair, thus avoiding the resolution limitations of multiplex PCR (see below).
Multiplex-PCR: The use of multiple, unique primer sets within a single PCR mixture to produce
amplicons of varying sizes specific to different DNA sequences. By targeting multiple genes at once, additional information may be gained from a single test run that otherwise would require several times the reagents and more time to perform. Annealing temperatures for each of the primer sets must be optimized to work correctly within a single reaction, and amplicon sizes, i.e., their base pair length, should be different enough to form distinct bands when visualized by
gel electrophoresis.
Nested PCR: increases the specificity of DNA amplification, by reducing background due to non-specific amplification of DNA. Two sets of primers are being used in two successive PCRs. In the first reaction, one pair of primers is used to generate DNA products, which besides the intended target, may still consist of non-specifically amplified DNA fragments. The product(s) are then used in a second PCR with a set of primers whose binding sites are completely or partially different from and located 3' of each of the primers used in the first reaction. Nested PCR is often more successful in specifically amplifying long DNA fragments than conventional PCR, but it requires more detailed knowledge of the target sequences.
Overlap-extension PCR: is a
genetic engineering technique allowing the construction of a DNA sequence with an alteration inserted beyond the limit of the longest practical primer length.
Quantitative PCR (Q-PCR): is used to measure the quantity of a PCR product (preferably real-time). It is the method of choice to quantitatively measure starting amounts of DNA, cDNA or RNA. Q-PCR is commonly used to determine whether a DNA sequence is present in a sample and the number of its copies in the sample. The method with currently the highest level of accuracy is Quantitative real-time PCR. It is often confusingly known as
RT-PCR (Real Time PCR) or RQ-PCR. QRT-PCR or RTQ-PCR are more appropriate contractions. RT-PCR commonly refers to
reverse transcription PCR (see below), which is often used in conjunction with Q-PCR. QRT-PCR methods use fluorescent dyes, such as Sybr Green, or
fluorophore-containing DNA probes, such as
TaqMan, to measure the amount of amplified product in real time.
RT-PCR: (Reverse Transcription PCR) is a method used to amplify, isolate or identify a known sequence from a
cellular or
tissue RNA. The PCR is preceded by a reaction using
reverse transcriptase to convert
RNA to
cDNA. RT-PCR is widely used in
expression profiling, to determine the expression of a gene or to identify the sequence of an RNA transcript, including transcription start and termination sites and, if the genomic DNA sequence of a gene is known, to map the location of
exons and
introns in the gene. The 5' end of a gene (corresponding to the transcription start site) is typically identified by an RT-PCR method, named
RACE-PCR, short for Rapid Amplification of cDNA Ends.
Solid Phase PCR: encompasses multiple meanings, including
Polony Amplification (where PCR colonies are derived in a gel matrix, for example), 'Bridge PCR' (the only primers present are covalently linked to solid support surface), conventional Solid Phase PCR (where Asymmetric PCR is applied in the presence of solid support bearing primer with sequence matching one of the aqueous primers) and Enhanced Solid Phase PCR
[27] (where conventional Solid Phase PCR can be improved by employing high Tm solid support primer with application of a thermal 'step' to favour solid support priming).
TAIL-PCR: Thermal asymmetric interlaced PCR is used to isolate unknown sequence flanking a known sequence. Within the known sequence TAIL-PCR uses a nested pair of primers with differing annealing temperatures; a degenerate primer is used to amplify in the other direction from the unknown sequence.
[28]Touchdown PCR: a variant of PCR that aims to reduce nonspecific background by gradually lowering the annealing temperature as PCR cycling progresses. The annealing temperature at the initial cycles is usually a few degrees (3-5˚C) above the Tm of the primers used, while at the later cycles, it is a few degrees (3-5˚C) below the primer Tm. The higher temperatures give greater specificity for primer binding, and the lower temperatures permit more efficient amplification from the specific products formed during the initial cycles.
[29]PAN-AC: This method uses isothermal conditions for amplification, and may be used in living cells.
[30][31]Universal Fast Walking: this method allows genome walking and genetic fingerprinting using a more specific 'two-sided' PCR than conventional 'one-sided' approaches (using only one gene-specific primer and one general primer - which can lead to artefactual 'noise')
[32] by virtue of a mechanism involving lariat structure formation. Streamlined derivatives of UFW are LaNe RAGE (lariat-dependent nested PCR for rapid amplification of genomic DNA ends)
[33], 5'RACE LaNe
[34] and 3'RACE LaNe
[35].
History
Main article:
History of polymerase chain reactionA 1971 paper in the
Journal of Molecular Biology by Kleppe and co-workers first described a method using an enzymatic assay to replicate a short DNA template with primers in vitro.
[36] However, this early manifestation of the basic PCR principle did not receive much attention, and the invention of the polymerase chain reaction in 1983 is generally credited to
Kary Mullis.
[37]At the core of the PCR method is the use of a suitable
DNA polymerase able to withstand the high temperatures of >90°C (>195°F) required for separation of the two DNA strands in the
DNA double helix after each
replication cycle. The DNA polymerases initially employed for
in vitro experiments presaging PCR were unable to withstand these high temperatures.
[2] So the early procedures for DNA replication were very inefficient, time consuming, and required large amounts of DNA polymerase and continual handling throughout the process.
A 1976 discovery of
Taq polymerase a DNA polymerase purified from the
thermophilic bacterium,
Thermus aquaticus, which naturally occurs in hot (50 to 80 °C (120 to 175 °F)) environments
[10] paved the way for dramatic improvements of the PCR method. The DNA polymerase isolated from T. aquaticus is stable at high temperatures remaining active even after DNA denaturation,
[11] thus obviating the need to add new DNA polymerase after each cycle
[3]. This allowed an automated thermocycler-based process for DNA amplification.
At the time he developed PCR in 1983, Mullis was working in
Emeryville, California for
Cetus Corporation, one of the first
biotechnology companies. There, he was responsible for synthesizing short chains of DNA. Mullis has written that he conceived of PCR while cruising along the
Pacific Coast Highway one night in his car.
[38] He was playing in his mind with a new way of analyzing changes (mutations) in DNA when he realized that he had instead invented a method of amplifying any DNA region through repeated cycles of duplication driven by DNA polymerase.
In
Scientific American, Mullis summarized the procedure: "Beginning with a single molecule of the genetic material DNA, the PCR can generate 100 billion similar molecules in an afternoon. The reaction is easy to execute. It requires no more than a test tube, a few simple reagents, and a source of heat."
[39] He was awarded the
Nobel Prize in Chemistry in
1993 for his invention,
[4] seven years after he and his colleagues at Cetus first put his proposal to practice. However, some controversies have remained about the intellectual and practical contributions of other scientists to Mullis' work, and whether he had been the sole inventor of the PCR principle. (see main article:
Kary Mullis)
Patent wars
The PCR technique was patented by
Cetus Corporation, where Mullis worked when he invented the technique in 1983. The Taq polymerase enzyme was also covered by patents. There have been several high-profile lawsuits related to the technique, including an unsuccessful lawsuit brought by
DuPont. The pharmaceutical company
Hoffmann-La Roche purchased the rights to the patents in
1992 and currently holds those that are still protected.
A related patent battle over the Taq polymerase enzyme is still ongoing in several jurisdictions around the world between Roche and
Promega. The legal arguments have extended beyond the life of the original PCR and Taq polymerase patents, which expired on
March 28,
2005[40]References
^ Bartlett & Stirling (2003)—A Short History of the Polymerase Chain Reaction. In: Methods Mol Biol. 226:3-6^
a b Saiki, RK; Scharf S, Faloona F, Mullis KB, Horn GT, Erlich HA, Arnheim N (Dec 20 1985). "
Enzymatic amplification of beta-globin genomic sequences and restriction site analysis for diagnosis of sickle cell anemia".
Science 230 (4732): 1350–4.
doi:
10.1126/science.2999980.
PMID 2999980.
^
a b Saiki, RK; Gelfand DH, Stoffel S, Scharf SJ, Higuchi R, Horn GT, Mullis KB, Erlich HA (1988). "
Primer-directed enzymatic amplification of DNA with a thermostable DNA polymerase".
Science 239: 487–91.
doi:
10.1126/science.2448875.
PMID 2448875.
^
a b Karry Mullis Nobel Lecture, December 8, 1993^ Cheng S, Fockler C, Barnes WM, Higuchi R (1994). "Effective amplification of long targets from cloned inserts and human genomic DNA". Proc Natl Acad Sci. 91: 5695–5699.
doi:
10.1073/pnas.91.12.5695.
PMID 8202550.
^
a b Joseph Sambrook and David W. Russel (2001). Molecular Cloning: A Laboratory Manual, 3rd ed., Cold Spring Harbor, N.Y.: Cold Spring Harbor Laboratory Press.
ISBN 0-87969-576-5. Chapter 8: In vitro Amplification of DNA by the Polymerase Chain Reaction
^ Pavlov AR, Pavlova NV, Kozyavkin SA, Slesarev AI (2004). "Recent developments in the optimization of thermostable DNA polymerases for efficient applications". Trends Biotechnol. 22: 253–260.
doi:
10.1016/j.tibtech.2004.02.011.
PMID 15109812.
^ Rychlik W, Spencer WJ, Rhoads RE (1990). "
Optimization of the annealing temperature for DNA amplification in vitro". Nucl Acids Res 18: 6409–6412.
doi:
10.1093/nar/18.21.6409.
PMID 2243783.
^
a b D.J. Sharkey, E.R. Scalice, K.G. Christy Jr., S.M. Atwood, and J.L. Daiss (1994). "Antibodies as Thermolabile Switches: High Temperature Triggering for the Polymerase Chain Reaction". Bio/Technology 12: 506–509.
doi:
10.1038/nbt0594-506.
^
a b Chien A, Edgar DB, Trela JM (1976). "Deoxyribonucleic acid polymerase from the extreme thermophile Thermus aquaticus". J. Bacteriol 174: 1550–1557.
PMID 8432.
^
a b Lawyer FC, Stoffel S, Saiki RK, Chang SY, Landre PA, Abramson RD, Gelfand DH (1993). "High-level expression, purification, and enzymatic characterization of full-length Thermus aquaticus DNA polymerase and a truncated form deficient in 5' to 3' exonuclease activity". PCR Methods Appl. 2: 275–287.
PMID 8324500.
^ PCR from problematic templates. Focus 22:1 p.10 (2000).
^ Helpful tips for PCR. Focus 22:1 p.12 (2000).
^ Pavlov AR, Pavlova NV, Kozyavkin SA, Slesarev AI (2006). "Thermostable DNA Polymerases for a Wide Spectrum of Applications: Comparison of a Robust Hybrid TopoTaq to other enzymes", in Kieleczawa J: DNA Sequencing II: Optimizing Preparation and Cleanup. Jones and Bartlett, pp. 241-257.
ISBN 0-7637338-3-0.
^ Chemical Synthesis, Sequencing, and Amplification of DNA (class notes on MBB/BIO 343). Arizona State University. Retrieved on
2007-
10-29.
^ Newton CR, Graham A, Heptinstall LE, Powell SJ, Summers C, Kalsheker N, Smith JC, and Markham AF (1989). "Analysis of any point mutation in DNA. The amplification refractory mutation system (ARMS)". Nucleic Acids Research 17 (7): 2503–2516.
doi:
10.1093/nar/17.7.2503.
PMID 2785681.
^ Stemmer WP, Crameri A, Ha KD, Brennan TM, Heyneker HL (1995). "Single-step assembly of a gene and entire plasmid from large numbers of oligodeoxyribonucleotides". Gene 164: 49–53.
doi:
10.1016/0378-1119(95)00511-4.
PMID 7590320.
^ Innis MA, Myambo KB, Gelfand DH, Brow MA. (1988). "DNA sequencing with Thermus aquaticus DNA polymerase and direct sequencing of polymerase chain reaction-amplified DNA". Proc Natl Acad Sci USA 85: 9436–4940.
doi:
10.1073/pnas.85.24.9436.
PMID 3200828.
^ Pierce KE and Wangh LJ (2007). "Linear-after-the-exponential polymerase chain reaction and allied technologies Real-time detection strategies for rapid, reliable diagnosis from single cells". Methods Mol Med. 132: 65–85.
doi:
10.1007/978-1-59745-298-4_7.
PMID 17876077.
^ Myriam Vincent, Yan Xu and Huimin Kong (2004). "Helicase-dependent isothermal DNA amplification". EMBO reports 5 (8): 795–800.
doi:
10.1038/sj.embor.7400200.
^ Q. Chou, M. Russell, D.E. Birch, J. Raymond and W. Bloch (1992). "Prevention of pre-PCR mis-priming and primer dimerization improves low-copy-number amplifications". Nucleic Acids Research 20: 1717–1723.
doi:
10.1093/nar/20.7.1717.
^ E. Zietkiewicz, A. Rafalski, and D. Labuda (1994). "Genome fingerprinting by simple sequence repeat (SSR)-anchored polymerase chain reaction amplification". Genomics 20 (2): 176–83.
doi:
10.1006/geno.1994.1151.
^ Ochman H, Gerber AS, Hartl DL (1988). "Genetic applications of an inverse polymerase chain reaction". Genetics 120: 621–623.
PMID 2852134.
^ Mueller PR, Wold B (1988). "In vivo footprinting of a muscle specific enhancer by ligation mediated PCR". Science 246: 780–786.
doi:
10.1126/science.2814500.
PMID 2814500.
^ Herman JG, Graff JR, Myöhänen S, Nelkin BD, Baylin SB (1996). "Methylation-specific PCR: a novel PCR assay for methylation status of CpG islands". Proc Natl Acad Sci U S A 93 (13): 9821–9826.
doi:
10.1073/pnas.93.18.9821.
PMID 8790415.
^ Isenbarger TA, Finney M, Ríos-Velázquez C, Handelsman J, Ruvkun G (2008). "Miniprimer PCR, a new lens for viewing the microbial world". Applied and Environmental Microbiology 74: 840–9.
doi:
10.1128/AEM.01933-07.
PMID 18083877.
^ Khan Z, Poetter K, Park DJ (2008). "Enhanced solid phase PCR: mechanisms to increase priming by solid support primers". Analytical Biochemistry 375: 391–393.
PMID 18267099.
^ Y.G. Liu and R. F. Whittier (1995). "Thermal asymmetric interlaced PCR: automatable amplification and sequencing of insert end fragments from P1 and YAC clones for chromosome walking". Genomics 25 (3): 674–81.
doi:
10.1016/0888-7543(95)80010-J.
^ Don RH, Cox PT, Wainwright BJ, Baker K, Mattick JS (1991). "
'Touchdown' PCR to circumvent spurious priming during gene amplification". Nucl Acids Res 19: 4008.
doi:
10.1093/nar/19.14.4008.
PMID 1861999.
^ David, F.Turlotte, E., (1998). "An Isothermal Amplification Method". C.R.Acad. Sci Paris, Life Science 321 (1): 909–914.
^ Fabrice David (September-October 2002).
Utiliser les propriétés topologiques de l’ADN: une nouvelle arme contre les agents pathogènes. Fusion.(in French)
^ Myrick KV, Gelbart WM (2002). "Universal Fast Walking for direct and versatile determination of flanking sequence". Gene 284: 125–131.
doi:
10.1016/S0378-1119(02)00384-0.
PMID 11891053.
^ Park DJ Electronic Journal of Biotechnology (online). 15 August 2005, vol. 8, no. 2^ Park DJ (2005). "A new 5' terminal murine GAPDH exon identified using 5'RACE LaNe". Molecular Biotechnology 29: 39–46.
doi:
10.1385/MB:29:1:39.
PMID 15668518.
^ Park DJ (2004). "3'RACE LaNe: a simple and rapid fully nested PCR method to determine 3'-terminal cDNA sequence". Biotechniques 36: 586–588,590.
PMID 15088375.
^ Kleppe K, Ohtsuka E, Kleppe R, Molineux I, Khorana HG (1971). "
Studies on polynucleotides. XCVI. Repair replications of short synthetic DNA's as catalyzed by DNA polymerases". J. Mol. Biol. 56: 341–361.
doi:
10.1016/0022-2836(71)90469-4.
^ Rabinow, Paul (1996). Making PCR: A Story of Biotechnology. Chicago: University of Chicago Press.
ISBN 0-226-70146-8.
^ Mullis, Kary (1998). Dancing Naked in the Mind Field. New York: Pantheon Books.
ISBN 0-679-44255-3.
^ Mullis, Kary (1990). "The unusual origin of the polymerase chain reaction". Scientific American 262 (4): 56–61, 64–5.
^ Advice on How to Survive the Taq Wars ¶2:
GEN Genetic Engineering News Biobusiness Channel: Article. May 1 2006 (Vol. 26, No. 9).
External links
Wikimedia Commons has media related to:
Polymerase chain reactionPCR at Home - Amateur Scientist article in the July 2000 issue of
Scientific American on performing PCRs with low-cost household materials.
US Patent for PCRNarrated animation and step-through animation of PCR - From the educational multimedia company Sumanas. Adobe Flash required.
Step-through animation of PCR - From
Cold Spring Harbor's Dolan DNA Learning Center. Adobe Flash required.
